Thursday, August 10, 2017

3 Simple steps to install VLC in Linux Mint 18.2

Follow the below steps to install VLC in Linux Mint 18.2

$sudo add-apt-repository ppa:videolan/stable-daily
$sudo apt-get update
$sudo apt-get install vlc

DNS configuration history in RHEL 5

   18  rpm -qa |bind
   19  rpm -qa |grep bind
   20  rpm -ivh bind-9.3.3-7.el5.i386.rpm 
   21  rpm -ivh bind-devel-9.3.3-7.el5.i386.rpm 
   22  rpm -ivh bind-libbind-devel-9.3.3-7.el5.i386.rpm 
   23  rpm -ivh bind-libs-9.3.3-7.el5.i386.rpm 
   24  rpm -ivh |grep bind
   25  rpm -qa |grep bind
   26  rpm -ivh bind-libbind-devel-9.3.3-7.el5.i386.rpm 
   27  rpm -ivh bind-libs-9.3.3-7.el5.i386.rpm 
   28  cd /var/named/chroot/var/named/
   32  rpm -qa |grep bind
   33  rpm -ivh bind-sdb-9.3.3-7.el5.i386.rpm 
   36  cd /var/named/chroot/
   42  ls named .conf
   43  ls named.conf
   44  service xinetd status
   45  cd /var/named/chroot/var/named/
   46  ls
   47  service iptables stop
   48  service iptables save
   49  setenforce 0
   50  ls
   57  ifconfig 
   58  ping 172.24.0.1
   59  chcon -R -t samba_share_t /data
   71  rpm -ivh caching-nameserver-9.3.3-7.el5.i386.rpm 
   72  cd /var/named/chroot/var/named/
   73  ls
   74  vi /var/named/chroot/etc/
   75  cd /var/named/chroot/etc/
   76  ls
   77  vi named.caching-nameserver.conf 
   78  ls
   79  cd /var/named/chroot/var/named/
   80  ls
   81  cp localdomain.zone for.example.com
   82  cp named.local rev.example.com
   83  chown root:named for.example.com
   84  chown root:named rev.example.com
   85  vi /etc/resolv.conf 
   86  vi /etc/hosts
   87  vi /etc/sysconfig/network-scripts/ifcfg-eth0 
   88  cd /var/named/chroot/etc
   89  cp named.caching-nameserver.conf named.conf
   90  chown root:named named.conf
   91  vi named.conf
   92  ls
   93  vi named.rfc1912.zones 
   94  cd /var/named/chroot/var/named/
   95  ls
   96  vi for.example.com 
   97  vi named.rfc1912.zones 
   98  vi rev.example.com 
   99  service named restart
  100  chkconfig named on
  101  dig -x 172.24.0.254

Linux Notes

Stages

#ps -ef | grep init
#rpm -qa |grep -i system-config-kickstart
#which init
Power on -> BIOS (RAM,kb,mouse,storage,etc)-> bootable media (MBR 512 bytes --bootcode stage1 grub)-->grub stage 1.5 -> menu -> select OS
#ls -ltr

stage 2 init process
#ps -ef |grep -i mingetty
power on -> bios ->mbr -grub(stage1)->grub (stage1.5)-> grub(stage2)->init->/etc/inittab->sets up the appropriate runlevel
#cd /etc/rc.d
#ls -ltr
bios -> grub -> init ->

Rescue environment

hda,sda = hd0, hda1,sda1 = hd0,0 first hard drive, first partition
linux partitions won't be found in the case of /etc/fstab is deleted
mkdir /mnt/sysimage
mount /dev/sda2  /mnt/sysimage/ #/dev/sda2 should be /
cd /mnt/sysimage

echo $? 0 means the previous command is executed correctly

seq 5 5 20  # start number increment and limitation

Tips & Tricks

1.Split the files
The following is an example of how to use the split command on a 600MB image.iso file:
# split -b 200m image.iso

It will generate three files, namely xaa,xab and xac of 200MB each. Afterwards you can use the cat command to combine the three to get back the original file, as follows
# cat xa* > newimage.iso

2. Prevent users from changing their passwords
You should have the root previliages to change this permission. Once you change this one users will not be able to change their passwords.
# chmod 511 /usr/bin/passwd

3. Crontab Example
first asterisk to enter the day of week 0-6, where 0 is Sunday. You can enter the month(1-12)in place of the second asterisk. Replace the third asterisk with the day of month (1-31). The fourth one is for the hour(0-23),while the fifth one is to enter the minutes(0-59).

For example, if you need to run a script daily at 5:30pm, then the entry will as shown below:
30 17 * * * sh /home/myuser/scripttorun.sh >/dev/null 2>&1

If the last part “>/dev/null 2>&1” is omitted, then by default, cron will send an e-mail to the user account after executing the cronjob.

4. How to use the swap as a file?
To make a swap file of 1GB, multiply 1024MB and 1024 to get a block size. Now at a shell prompt as the root user, type the following command with the count being equal to the desired block size:
dd if=/dev/zero of=/swapfile bs=1024 count=1048576
Now set up the swap file:
mkswap /swapfile

Enable the swap file after create it by using the following command:
swapon /swapfile

Add the following entry in the /etc/fstab file to make the system activate this file as swap while booting the system:
/swapfile swap swap defaults 0 0

A quick guide to writing scripts using the bash shell

A simple shell script
A shell script is little more than a list of commands that are run in sequence. Conventionally, a shellscript should start with a line such as the following: 
#!/bin/bash
THis indicates that the script should be run in the bash shell regardless of which interactive shell the user has chosen. This is very important, since the syntax of different shells can vary greatly. 
A simple example
Here's a very simple example of a shell script. It just runs a few simple commands 
#!/bin/bash
echo "hello, $USER. I wish to list some files of yours"
echo "listing files in the current directory, $PWD"
ls  # list files
Firstly, notice the comment on line 4. In a bash script, anything following a pound sign # (besides the shell name on the first line) is treated as a comment. ie the shell ignores it. It is there for the benifit of people reading the script. 
$USER and $PWD are variables. These are standard variables defined by the bash shell itself, they needn't be defined in the script. Note that the variables are expanded when the variable name is inside double quotes. Expanded is a very appropriate word: the shell basically sees the string $USER and replaces it with the variable's value then executes the command. 
We continue the discussion on variables below ... 
Variables
Any programming language needs variables. You define a variable as follows: 
X="hello"
and refer to it as follows: 
$X
More specifically, $X is used to denote the value of the variable X. Some things to take note of regarding semantics: 
bash gets unhappy if you leave a space on either side of the = sign. For example, the following gives an error message: 
X = hello
while I have quotes in my example, they are not always necessary. where you need quotes is when your variable names include spaces. For example, 
X=hello world # error
X="hello world" # OK 

This is because the shell essentially sees the command line as a pile of commands and command arguments seperated by spaces. foo=baris considered a command. The problem with foo = bar is the shell sees the word foo seperated by spaces and interprets it as a command. Likewise, the problem with the command X=hello world is that the shell interprets X=hello as a command, and the word "world" does not make any sense (since the assignment command doesn't take arguments). 
Single Quotes versus double quotes
Basically, variable names are exapnded within double quotes, but not single quotes. If you do not need to refer to variables, single quotes are good to use as the results are more predictable. 
An example 
#!/bin/bash
echo -n '$USER=' # -n option stops echo from breaking the line
echo "$USER"
echo "\$USER=$USER"  # this does the same thing as the first two lines
The output looks like this (assuming your username is elflord) 
$USER=elflord
$USER=elflord
so the double quotes still have a work around. Double quotes are more flexible, but less predictable. Given the choice between single quotes and double quotes, use single quotes. 
Using Quotes to enclose your variables
Sometimes, it is a good idea to protect variable names in double quotes. This is usually the most important if your variables value either (a) contains spaces or (b) is the empty string. An example is as follows: 
#!/bin/bash
X=""
if [ -n $X ]; then  # -n tests to see if the argument is non empty
echo "the variable X is not the empty string"
fi

This script will give the following output: 
the variable X is not the empty string
Why ? because the shell expands $X to the empty string. The expression [ -n ] returns true (since it is not provided with an argument). A better script would have been: 
#!/bin/bash
X=""
if [ -n "$X" ]; then  # -n tests to see if the argument is non empty
echo "the variable X is not the empty string"
fi

In this example, the expression expands to [ -n "" ] which returns false, since the string enclosed in inverted commas is clearly empty. 
Variable Expansion in action
Just to convince you that the shell really does "expand" variables in the sense I mentioned before, here is an example: 
#!/bin/bash
LS="ls"
LS_FLAGS="-al"

$LS $LS_FLAGS $HOME

This looks a little enigmatic. What happens with the last line is that it actually executes the command 
ls -al /home/elflord
(assuming that /home/elflord is your home directory). That is, the shell simply replaces the variables with their values, and then executes the command. 
Using Braces to Protect Your Variables
OK. Here's a potential problem situation. Suppose you want to echo the value of the variable X, followed immediately by the letters "abc". Question: how do you do this ? Let's have a try : 
#!/bin/bash
X=ABC
echo "$Xabc"
THis gives no output. What went wrong ? The answer is that the shell thought that we were asking for the variable Xabc, which is uninitialised. The way to deal with this is to put braces around X to seperate it from the other characters. The following gives the desired result: 
#!/bin/bash
X=ABC
echo "${X}abc"
Conditionals, if/then/elif
Sometimes, it's necessary to check for certain conditions. Does a string have 0 length ? does the file "foo" exist, and is it a symbolic link , or a real file ? Firstly, we use the if command to run a test. The syntax is as follows: 
if condition
then
statement1
statement2
....
fi
Sometimes, you may wish to specify an alternate action when the condition fails. Here's how it's done. 
if condition
then
statement1
statement2
....
else
statement3
fi
alternatively, it is possible to test for another condition if the first "if" fails. Note that any number of elifs can be added. 
if condition1
then
statement1
statement2
......
elif condition2
then
statement3
statement4
....  
elif condition3
then
statement5
statement6
....  


fi
The statements inside the block between if/elif and the next elif or fi are executed if the corresponding condition is true. Actually, any command can go in place of the conditions, and the block will be executed if and only if the command returns an exit status of 0 (in other words, if the command exits "succesfully" ). However, in the course of this document, we will be only interested in using "test" or "[ ]" to evaluate conditions. 
The Test Command and Operators 
The command used in conditionals nearly all the time is the test command. Test returns true or false (more accurately, exits with 0 or non zero status) depending respectively on whether the test is passed or failed. It works like this: 
test operand1 operator operand2
for some tests, there need be only one operand (operand2) The test command is typically abbreviated in this form: 
operand1 operator operand2 ]
To bring this discussion back down to earth, we give a few examples: 
#!/bin/bash
X=3
Y=4
empty_string=""
if [ $X -lt $Y ] # is $X less than $Y ? 
then
echo "\$X=${X}, which is smaller than \$Y=${Y}"
fi

if [ -n "$empty_string" ]; then
echo "empty string is non_empty"
fi

if [ -e "${HOME}/.fvwmrc" ]; then  # test to see if ~/.fvwmrc exists
echo "you have a .fvwmrc file"
if [ -L "${HOME}/.fvwmrc" ]; then  # is it a symlink ?  
echo "it's a symbolic link
elif [ -f "${HOME}/.fvwmrc" ]; then  # is it a regular file ?
echo "it's a regular file"
fi
else
echo "you have no .fvwmrc file"
fi

Some pitfalls to be wary of
The test command needs to be in the form "operand1<space>operator<space>operand2" or operator<space>operand2 , in other words you really need these spaces, since the shell considers the first block containing no spaces to be either an operator (if it begins with a '-') or an operand (if it doesn't). So for example; this 
if [ 1=2 ]; then 
echo "hello"
fi
gives exactly the "wrong" output (ie it echos "hello", since it sees an operand but no operator.) 
Another potential trap comes from not protecting variables in quotes. We have already given an example as to why you must wrap anything you wish to use for a -n test with quotes. However, there are a lot of good reasons for using quotes all the time, or almost all of the time. Failing to do this when you have variables expanded inside tests can result in very wierd bugs. Here's an example: For example, 
#!/bin/bash
X="-n"
Y=""
if [ $X = $Y ] ; then
echo "X=Y"
fi
This will give misleading output since the shell expands our expression to 
[ -n = ]
and the string "=" has non zero length. 
A brief summary of test operators
Here's a quick list of test operators. It's by no means comprehensive, but its likely to be all you'll need to remember (if you need anything else, you can always check the bash manpage ... ) 
operator
produces true if... 
number of operands
-n
operand non zero length
1
-z
operand has zero length
1
-d
there exists a directory whose name is operand
1
-f
there exists a file whose name is operand
1
-eq
the operands are integers and they are equal
2
-neq
the opposite of -eq
2
=
the operands are equal (as strings)
2
!=
opposite of = 
2
-lt
operand1 is strictly less than operand2 (both operands should be integers)
2
-gt
operand1 is strictly greater than operand2 (both operands should be integers)
2
-ge
operand1 is greater than or equal to operand2 (both operands should be integers)
2
-le
operand1 is less than or equal to operand2 (both operands should be integers)
2
Loops 
Loops are constructions that enable one to reiterate a procedure or perform the same procedure on several different items. There are the following kinds of loops available in bash 
for loops 
while loops 
For loops
The syntax for the for loops is best demonstrated by example. 
#!/bin/bash
for X in red green blue
do
echo $X
done
THe for loop iterates the loop over the space seperated items. Note that if some of the items have embedded spaces, you need to protect them with quotes. Here's an example: 
#!/bin/bash
colour1="red"
colour2="light blue"
colour3="dark green"
for X in "$colour1" $colour2" $colour3"
do
echo $X
done
Can you guess what would happen if we left out the quotes in the for statement ? This indicates that variable names should be protected with quotes unless you are pretty sure that they do not contain any spaces. 
Globbing in for loops
The shell expands a string containing a * to all filenames that "match". A filename matches if and only if it is identical to the match string after replacing the stars * with arbitrary strings. For example, the character "*" by itself expands to a space seperated list of all files in the working directory (excluding those that start with a dot "." ) So 
echo *
lists all the files and directories in the current directory. 
echo *.jpg
lists all the jpeg files. 
echo ${HOME}/public_html/*.jpg
lists all jpeg files in your public_html directory. 
As it happens, this turns out to be very useful for performing operations on the files in a directory, especially used in conjunction with a for loop. For example: 
#!/bin/bash
for X in *.html
do
grep -L '<UL>' "$X"
done
While Loops
While loops iterate "while" a given condition is true. An example of this: 
#!/bin/bash
X=0
while [ $X -le 20 ]
do
echo $X
X=$((X+1))
done
This raises a natural question: why doesn't bash allow the C like for loops 
for (X=1,X<10; X++)
As it happens, this is discouraged for a reason: bash is an interpreted language, and a rather slow one for that matter. For this reason, heavy iteration is discouraged. 
Command Substitution
Command Substitution is a very handy feature of the bash shell. It enables you to take the output of a command and treat it as though it was written on the command line. For example, if you want to set the variable X to the output of a command, the way you do this is via command substitution. 
There are two means of command substitution: brace expansion and backtick expansion. 
Brace expansion workls as follows: $(commands) expands to the output of commands This permits nesting, so commands can include brace expansions 
Backtick expansion expands `commands` to the output of commands 
An example is given;: 
#!/bin/bash
files="$(ls )"
web_files=`ls public_html`
echo $files
echo $web_files
X=`expr 3 \* 2 + 4` # expr evaluate arithmatic expressions. man expr for details.
echo $X
Note that even though the output of ls contains newlines, the variables do not. Bash variables can not contain newline characters (which is a pain in the butt. But that's life) Anyway, the advantage of the $() substitution method is almost self evident: it is very easy to nest. It is supported by most of the bourne shell varients (the POSIX shell or better is OK). However, the backtick substitution is slightly more readable, and is supported by even the most basic shells (any #!/bin/sh version is just fine)